Our PH001 Alkaline Water Ionizer Filters, combined with our PH002 Ultrafiltration UF Membrane Filter, is quite simply a high alkaline filtration system!
Simply screw PH001 on to the bottom of PH002 and you’re good to go!!
Our PH001/PH002 combo is compatible with our pH RECHARGE, pH RESTORE & pH REFRESH models.
MASSIVE FILTER CAPACITY!!
PH001 has a HUGE 1500 Cup/96 Gallon/360 Litre capacity per filter, while PH002 HAS AN EVEN BIGGER 264 gallon/1000 litre CAPACITY!
On average you’ll use 3 X PH001 filters before changing your PH002 filter (hence why we offer this value pack)
Never pay full price again, Subscribe & Save BIG on your replacement filters HERE
We recommend replacing your PH001 filter every 1500 cups/96 gallons/360 litres.
The average person consumes (68 ounces) per day (2 litres).
The more people in your household, the more frequent the filter replacement.
As a general guideline:
1 person = Replace every 6 months
2 people = Replace every 3 months
3 people = Replace every 2 months
4+ people = Replace each month
We recommend replacing your PH002 every third PH001 filter change.
As a general guide (for PH002);
1 person = Replace every 500 days / 16 months
2 persons = Replace every 250 days / 8 months
3 persons = Replace every 167 days / 5 months
4 persons = Replace every 125 days / 4 months
DIMENSIONS & WEIGHT:
Height: 4.25"/10.8 cm
Length: 3.25"/8.26 cm
Width: 3.25"/8.26 cm
Weight: 7 oz/.20 kg
FILTER HOUSING: Food grade PP plastic
96 gallons / 363 litres X 3 (PH0001)
264 gallons / 1000 litres (PH002)
FILTER CONTENT: (PH001)
Our PH001 filter uses a proprietary blend of several filter materials, including Coconut Activated Carbon, Ion-exchange resin, Zeolite, and mineral stones such as Tourmaline, Far Infrared, and Maifan.
FILTER FUNCTIONALITY: (PH001)
-Increases water pH level
-Increases negative oxidation reduction potential (-ORP)
-Remineralises water with minerals such as zinc, iron, calcium, magnesium, selenium, lithium
-Improves taste and smell
-Softens hard water
-Ionises, produces small water molecules
-Filters particles including dust, sand, rust, grit
-Removes heavy metals including arsenic, lead, copper, iron, tin - to name just a few
-Filters chlorine, chloramine, & some fluoride
-Removes chemicals and impurities including disinfectants, pharmaceuticals, microplastics
FILTER CONTENT: (PH002)
Our PH002 is made from Ultrafiltration (UF) membrane
FILTER FUNCTIONALITY: (PH002)
-Removes tiny particles as small as 0.01 micron from water including heavy metals, chlorine, contaminants, rust and dust.
-Allows minerals to permeate through the membrane
-Improves taste and smell
-Increases water pH (when combined with our PH001 filter)
Question: Why does the PH001 filter so fast?
Answer: The PH001 filters were specifically designed to provide fast and superior filtration! The contents of the filter contain several natural mineral ingredients that purify by ADSORPTION!
Adsorption is the process in which atoms, ions or molecules from a substance (it could be gas, liquid or dissolved solid) adhere to a surface of the adsorbent, in this case, our mineral ball blend.
The contaminants removed ionically bond to the massive surface area of the minerals and remain there, never leaching back into the water due to the strength of the ionic bond.
This process happens instantly on contact with the water, so, the PH001 is a fast filter by design!
Question: I’ve started using the PH001 and notice small black particles, is it safe?
Answer: The black that you are seeing is the dust from the activated coconut carbon, and this should rinse though with proper prepping. It is in no way toxic, or dangerous if some has been ingested.
We would ask that you please prep the filter once more, minus the shaking, run 2-3 reservoirs of water through, and it should run clear.
Question: What are the filter prep steps that should be followed for best performance for the PH001?
1.) Please fully saturate your filter and soak it for 10 minutes.
2.) Run water through the filter, top, and bottom then give it a few good shakes.
3.) Insert the filter into the reservoir while giving a twist.
4.) Fill the reservoir twice and discard this water.
5.) You are now ready to go!
Question: What does a PH002 Ultra Filtration (UF) Membrane filter do?
Answer: The PH002 filters dissolve molecules as small as 0.01 micron, and extremely small particles (like sand and silt) from your drinking water, resulting in natural, clean, purified water. Combined with our PH001 filter it may also help to increase the pH levels because the water sitting in contact with the PH001 material longer when the PH002 is attached.
Question: How does the PH002 attach to the PH001
Answer: To attach PH002 to PH001, first place the PH002 gasket on the bottom of the PH001. Then line the four tabs on PH002 between the four cutouts on PH001. Then, you need to push a little and twist the PH002 to the left at the same time, so that the PH002 tabs sit under the PH001 tabs.
We offer 3 shipping options for your convenience.
Free shipping ~ 5 to 7 business days, plus processing time.
Expedited shipping ~ 2 business days shipping plus processing time.
Priority shipping ~ next business day shipping plus processing time.
For more information on our shipping policies please CLICK HERE
PH001 Alkaline Water Filter Cartridge (3-Pack)
PH002 Ultrafiltration Water Filter (UF Membrane)
pH RECHARGE 1F Countertop Alkaline Water Filter